DES
: Data Encryption Standard, data block cipher.
•
•
AES
: Advanced Encryption Standard, data block cipher.
•
None
: No Privacy passphrase is required.
•
Privacy Phrase
: If either DES or AES is selected, enter a Privacy phrase between
8 and 32 characters in length.
4.
Click
Apply
to save your changes.
Figure 41: Enabling the SNMPv3 agent
Enabling SNMP Trap Notifications
If you have an SNMP trap receiver on the network, you can configure ZoneDirector to
send SNMP trap notifications to the server. Enable this feature if you want to automatically
receive notifications for AP and client events that indicate possible network issues.
To enable SNMP trap notifications:
1.
In the
Network Management
section of the
Configure > System
page, scroll down
to the bottom of the page.
2.
Under
SNMP Trap
, select the
Enable SNMP Trap
check box.
3.
In SNMP Trap format, select either SNMPv2 or SNMPv3. You can select only one
type of trap receiver.
• If you select SNMPv2, you only need to enter the IP addresses of up to four SNMP
trap receivers on your network.
• If you select SNMPv3, enter up to four trap receiver IP addresses along with
authentication method passphrase and privacy (encryption) settings.
4.
Click
Apply
to save your changes.
71
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Configuring System Settings
Enabling Network Management Systems
