WLAN LED
When Smart Mesh is enabled, the behavior of the WLAN LED indicates downlink status.
Refer to the table below for a complete list of possible LED colors and behaviors for
Root APs and Mesh APs, and the mesh status that they indicate.
Root AP / Mesh AP / eMAP
LED Color/Behavior
• No mesh downlink, and;
• At least one client is associated with the
AP
Solid Green
• No mesh downlink, and;
• No client is associated with the AP
Solid amber (not available on some models
• At least one mesh downlink exists, and;
• At least one client is associated with the
AP
Fast blinking green
• At least one mesh downlink exists, and;
• No client is associated with the AP
Slow blinking green
Signal/Air Quality LED
Mesh AP
Root AP / eMAP
LED Color/Behavior
• Connected to a Root AP
or another Mesh AP
• Signal quality is good
NA
Solid Green
• Connected to a Root AP
or another Mesh AP
• Signal quality is fair or
poor
NA
Fast blinking green
The AP is searching for an
uplink
NA
Slow blinking green
NA
This is a Root AP or eMAP
Off
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
306
Deploying a Smart Mesh Network
Using the ZoneFlex LEDs to Determine the Mesh Status
