4.
Enter the command
set meshcfg passphrase <current_passphrase>
,
where current_passphrase is the passphrase that the mesh network is currently
using. To paste text into PuTTY, press ctrl+v to paste, then click the right mouse
button.
5.
Enter the command
set mesh auto
.
6.
If there are multiple ZoneDirectors on the network, you may need to specify which
ZoneDirector the AP should connect to, using the command
set director ip
<ZoneDirector’s IP address>
.
7.
If a management VLAN is used for ZoneDirector-AP management traffic, enter the
following command:
set ipaddr wan vlan <vlan ID>
.
8.
Enter the command
reboot
to restart the AP with the new configuration changes.
9.
Close the SSH client.
You have completed recovering the isolated mesh AP. You should be able to manage
this AP again shortly. Please wait at least 15 minutes (to allow the mesh network to
stabilize), and then try managing this AP again via ZoneDirector.
Best Practices and Recommendations
For recommendations and best practices in planning and deploying a Ruckus Wireless
Smart Mesh network, refer to
Mesh Networking Best Practices
on page 355.
