APs' primary/secondary ZD settings will not be overwritten by the secondary
ZoneDirector's configuration after failover to the secondary controller.
12.
Click
Apply
to save your changes.
13.
Reboot the backup/secondary ZoneDirector for all changes to take effect (
Administer
>
Restart
>
Restart
.)
The imported APs will be placed into AP Groups according to the settings that were
backed up from the primary controller. If the original AP Group or WLAN Group name
does not exist on the destination controller, the AP will be placed in the System Default
AP Group/WLAN Group. Additionally, you must make sure that the maximum number
of APs is not exceeded.
Table 29: Max APs per Controller
Max APs per controller
Model
150
ZoneDirector 1200
500
ZoneDirector 3000
1000
ZoneDirector 5000
Importing a USB Software Package
Ruckus ZoneFlex Access Points with USB ports ("SmartPoint" APs) can be configured
to support a range of 3G, 4G/LTE, and WiMAX wireless USB devices for non-Wi-Fi
wireless connection to a service provider's network.
The ZoneDirector web interface allows administrators to provision SmartPoint APs with
the USB device configuration files directly through ZoneDirector, providing a simple and
straightforward provisioning process with minimal human intervention required.
Provisioning requires that the SmartPoint Access Points must be connected to the
ZoneDirector acting as the provisioning server over the wired network. After an AP is
provisioned, an automatic 3G/4G/LTE/WiMAX network connection is made to connect
the AP to the Internet, then to ZoneDirector, enabling the creation of an LWAPP tunnel
and providing 802.11 wireless services.
To upload a USB provisioning file to ZoneDirector:
1.
Go to
Configure
>
Access Points
.
2.
Scroll down to Access Point USB Software Packages.
3.
Click
Choose File
, and select the file to upload.
4.
Click
OK
to upload the file to ZoneDirector
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
212
Managing Access Points
Importing a USB Software Package
