manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, User Manual

Share
Download
Ruckus Wireless ZoneDirector 1200 User Manual Download Page 336

Figure 245: The License page

Support Entitlement

A Support Entitlement license allows you to extend the period for which you are allowed
to continue upgrading your ZoneDirector when newer versions are released.

If your support contract has expired, you can contact your Ruckus customer service
representative or Ruckus reseller to purchase additional support service. After you have
purchased a support contract, you can download the entitlement file and automatically
import into your ZoneDirector or manually download the file and upload it to ZoneDirector.

To import a new Support entitlement file:

1.

Go to 

Administer

 > 

Support

.

2.

In the 

Support Services

 section, click 

Update Services by File

 to import a locally

saved support activation file, or click 

Renew Services Online

 to download and install

a new support service automatically.

Figure 246:

Summary of Contents for ZoneDirector 1200










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands