manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, User Manual

Share
Download
Ruckus Wireless ZoneDirector 1200 User Manual Download Page 34

Figure 11: Select the 006 DNS Servers check box, and then type your DNS server’s IP address
in the Data entry section

Step 3: Register the ZoneDirector IP Addresses with a DNS Server

After you complete configuring the DHCP server with DNS related information, you need
to register the IP addresses of ZoneDirector devices on the network with your DNS
server. The procedure for this task depends on the DNS server software that you are
using.

Information on configuring the built-in DNS server on Windows is available at

http://support.microsoft.com/kb/814591

NOTE

 If your DNS server prompts you for the corresponding host name for each

ZoneDirector IP address, you MUST enter zonedirector. This is critical to ensuring that
the APs can resolve the ZoneDirector IP address.

After you register the ZoneDirector IP addresses with your DNS server, you have
completed this procedure. APs on the network should now be able to discover
ZoneDirector on another subnet.

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

34

Introducing ZoneDirector

Ensuring That APs Can Communicate with ZoneDirector

Summary of Contents for ZoneDirector 1200










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands