R&S
FS-K30
General Information
Limit
Line
Software Manual 1300.6637.42 - 03
38
1.9.3 Deleting Limit Lines
Existing limit lines can be deleted by pressing the
DELETE
softkey from the limit line
selection softkey menu
The
DELETE
softkey allows the limit line selected in the limit line selection view to be
deleted.
1.9.4 Enabling / disabling Limit Lines
Limit lines can be enabled and disabled. When a limit line is enabled it will be
displayed in the relevant results graph, and limit checking will be performed. When a
limit line is disabled it will not be displayed and no limit checking for this line will be
performed.
To enable/disable a limit line select the required limit line in the limit line selection view.
When the required limit line is highlighted press the ENTER key or press the rollkey to
toggle the state of the limit line between enabled and disabled. When a limit line is
enabled a symbol is shown in the
Enabled
field. Note that only one limit line of each
type can be active at a given time.
Fig. 17 Enabling/Disabling limit lines using the Limit line selection view
