R&S
FS-K30
Conventions Used in the Documentation
Software Manual 1300.6637.42 - 03
7
Conventions Used in the Documentation
The following conventions are used throughout the R&S FS-K30 Software Manual:
Typographical conventions
Convention
Description
“Graphical user interface elements”
All names of graphical user interface elements both on the screen
and on the front and rear panels, such as dialog boxes, softkeys,
menus, options, buttons etc., are enclosed by quotation marks.
“KEYS”
Key names are written in capital letters and enclosed by quotation
marks.
Input
Input to be entered by the user is displayed in italics.
File names, commands,
program code
File names, commands, coding samples and screen output are
distinguished by their font.
"Links"
Links that you can click are displayed in blue font.
"References"
References to other parts of the documentation are enclosed by
quotation marks.
Other conventions
I
Remote commands
: Remote commands may include abbreviations to simplify
input. In the description of such commands, all parts that have to be entered are
written in capital letters. Additional text in lower-case characters is for information
only.
I
Procedure descriptions
: When describing how to operate the device, several
alternative methods may be available to perform the same task. In this case, the
procedure using the touchscreen is described, where available. Any elements that
can be activated by touching can also be clicked using an additionally connected
mouse. The alternative procedure using the keys on the device or the on-screen
keyboard is only described if it deviates from the standard operating procedures as
described in the Quick Start Guide under "Basic Operations".
The terms "
select
" and "
press
" may refer to any of the described methods, i.e. using a
finger on the touchscreen, a mouse pointer in the display, or a key on the device or on
a keyboard.
