If all tests pass, then this screen is displayed, indicating that the AutoRAE 2 system is
ready for use:
If there are instruments in the cradles, their warm-up process starts automatically as soon
as their respective cradle has been powered up and identified by the AutoRAE 2
Controller.
19.4. User Interface
All functions and configurations are initiated by using the three buttons on the Controller,
[Y/+], [MODE], and [N/-]:
“Soft keys” are shown on the display, and the AutoRAE 2 Controller’s buttons
correspond to soft keys directly above them. For example:
Summary of Contents for AutoRAE 2
