12.1. Gas Inlet Configuration Settings
“Gas Bottle Information” tells the AutoRAE 2 what kind of gas is supplied to each gas
inlet. The “Gas Bottle Information” section includes configuration parameter settings for
the two AutoRAE 2 Cradle gas inlets including gas types, concentrations, concentration
units, purge time, and soak time for gas cylinders connected to each gas inlet. You can
modify these values and upload them to your AutoRAE 2 Cradle(s) or download the
values currently programmed into the Cradle to ProRAE Studio II.
There are eight gas configurations (“Gas Config”), of which only Gas Config 8 is used.
Gas Config 8 corresponds to code G8 displayed on the cradle LED display.
Gas Configs 1 to 7
are not used
Gas Config 8 is
the only one
available
Gas Config 8, as
it appears on the
Cradle LED
display
Summary of Contents for AutoRAE 2
