When an instrument fails calibration, the word “Fail” is in the instrument’s row, and the
row is highlighted in red. You can get a report for it and the other instruments in the
system’s cradles by pressing [Y/+] (“Report”).
If an instrument does not pass calibration, check the sensor’s age, and consult the
instrument’s User’s Guide.
20.6. Direct Bump Testing And Calibrating Via
The Cradles’
Buttons
When multiple AutoRAE 2 Cradles are connected to a Controller, they can still be used
individually to perform a bump test or calibration.
1.
Place one or more instruments in the Cradles.
2.
Press either Bump or Cal.
Summary of Contents for AutoRAE 2
