Specifications
continued
Gas Inlet/Outlet Ports
AutoRAE 2 Controller
6 inlets (1 dedicated fresh air inlet and 5 configurable
calibration gas inlets); 1 exhaust port
Cradle
3 inlets (1 dedicated fresh air inlet and 2 configurable
calibration gas inlets); 1 exhaust port
Gas Port Connectors
AutoRAE 2 Controller
Connectors with 200-series barbs, 1/8" (3.18 mm) ID tubing
Cradle:
Same as above
Gas Regulator
AutoRAE 2 Controller
Demand-flow regulator (0 to 1,000 psig/70 bar)
Cradle
Same as above
Pump Flow Rate
AutoRAE 2 Controller
Built-in pump (500 ml/min)
MultiRAE Cradle
None; relies on instrument’s pump to pull in air
ToxiRAE Pro Cradle
400cc/min pump (typical)
QRAE 3 Cradle
400cc/min pump (typical)
Handheld PID Cradle
None; relies on instrument’s pump to pull in air
Data Storage
AutoRAE 2 Controller
Standard 2 GB SD card with security lock
Cradle
None. Data stored only on PC
PC Communications
AutoRAE 2 Controller
USB (Type B) port for direct connection to PC
Cradle
Same as above
Summary of Contents for AutoRAE 2
