Rae AutoRAE 2, User Manual

Page: 49 / 121

13. Upgrading Firmware On The AutoRAE 2 Cradle
Upgrades to a stand-alone AutoRAE 2 Cradle’s firmware can be loaded into the
AutoRAE 2 Cradle using ProRAE Studio II software running on a PC. If the Cradle (or
multiple Cradles) is attached to an AutoRAE 2 Controller, follow the AutoRAE 2
Controller Firmware Upgrade instructions on page 99.
1.
Download firmware from the RAE Systems web site or from a CD-ROM.
2. Connect a PC running ProRAE Studio II to the AutoRAE 2 Cradle via a USB cable.
3.
Press and hold the Bump key until “PC” appears in the display.
4. Start ProRAE Studio II.
5.
Click “Administrator.”
6.
Enter the password (the default is “rae”).
7.
Click “OK.”
8.
Click “Detect the instruments automatically.”