6.6. Placing A ToxiRAE Pro Monitor In The Cradle
The ToxiRAE Pro cradle requires one of two different adapters, and each is specific to
the type of ToxiRAE Pro. They click into place and can be easily removed, in case you
want to use one cradle for bump testing/calibrating/managing different types of ToxiRAE
Pro monitors.
6.6.1. Installing Adapters In The ToxiRAE Pro Cradle
The two types of ToxiRAE Pro adapters are shown here:
Align the two holes in the appropriate adapter with the two matching ports inside the
Capture Mechanism.
Note:
The adapters can be removed by pulling on the “thumb tab” at the top of each one
(it fits into a niche in the capture mechanism).
Adapter for ToxiRAE Pro,
ToxiRAE Pro CO
2
and
ToxiRAE Pro LEL
Adapter for
ToxiRAE Pro PID
Adapter for ToxiRAE Pro,
ToxiRAE Pro CO
2
and
ToxiRAE Pro LEL
Adapter for
ToxiRAE Pro PID
Summary of Contents for AutoRAE 2
