5. Powering The AutoRAE 2 Cradle
When used as a stand-alone unit, the AutoRAE 2 Cradle is powered by its own AC
adapter. (When an AutoRAE 2 Cradle is attached to an AutoRAE 2 Controller, it receives
its power from the AutoRAE 2 Controller, and therefore does not need a separate AC
adapter.) The jack for the AC adapter connection is in the recess of the left end cap. Plug
the barrel end of the AC adapter into the AutoRAE 2 Cradle and the transformer into an
AC outlet.
Caution:
Never use the AutoRAE 2 Cradle or its AC adapter in wet or damp
environments or hazardous locations.
Plug barrel from AC
adapter into jack
Summary of Contents for AutoRAE 2
