6.3. Connecting An AC Adapter
The AutoRAE 2 Cradle uses a 12V, 1.25A DC adapter. Plug the barrel end into the port
on the side of the AutoRAE 2 Cradle and the transformer end into an AC power source.
There is no power switch, so when power is applied to the AC adapter, the AutoRAE 2
Cradle is powered.
Caution:
Never use the AutoRAE 2 Cradle or its AC adapter in wet or damp
environments or hazardous locations.
Summary of Contents for AutoRAE 2
