18. Powering an AutoRAE 2 Controller-Based System
An AutoRAE 2 Controller-based system is powered by its 12V, 7.5A AC adapter. The
jack for the AC adapter connection is in the recess on the left side of the AutoRAE 2
Controller, next to the power on/off switch. Plug the barrel end of the AC adapter into the
AutoRAE 2 and the transformer into an AC outlet.
Caution:
Never use the AutoRAE 2 Controller or its AC adapter in wet or damp
environments or hazardous locations.
Plug barrel from AC
adapter into jack
Summary of Contents for AutoRAE 2
