17. Setting Up an AutoRAE 2 Controller-based System
A single AutoRAE 2 Controller can connect with up to 10 AutoRAE 2 Cradles (these can
be all of one kind, or mixed types). The Terminal Adapter must be connected to the final
(rightmost) AutoRAE 2 Cradle.
To assemble an AutoRAE 2 Controller-Based System, slide an AutoRAE 2 Cradle snugly
against the AutoRAE 2 Controller. If you have more than one AutoRAE 2 Cradle, slide
each one against the other, until all are held snugly. Then slide the Terminal Adapter
against the last one. Press them all into place once more, and then insert the Philips
screws that hold the units securely together.
Tighten all of the Philips screws, and then press the black plastic caps over them.
Summary of Contents for AutoRAE 2
