Handheld PID Cradle
Extending the Handheld PID Cradle to accommodate an UltraRAE 3000
The UltraRAE 3000 has a gas separation tube holder that extends the length of the
instrument. In order to accommodate the extra length, the Handheld PID Cradle is
designed so that it extends.
1.
Turn the Handheld PID Cradle over.
2.
Remove the screw with the red washer.
3.
Pull out the capture mechanism until it is fully extended.
4.
Replace the screw.
Exhaust port
2 gas inlets
DC input
from AC
adapter
Air inlet
F
i
lter
Sensors for testing
LED alarms
Sensor for
testing
buzzer
Release
mechanism
Capture
mechanism
USB port
(not shown)
2-character
LED display
Bump/Status
LED
Bump
key
Charge contacts
Charging status
LED
Cal
key
Cal/Status
LED
Summary of Contents for AutoRAE 2
