CAUTION!
Do not remove the SD card from its slot or insert an SD card into an empty slot while the
AutoRAE 2 Controller is running. This may damage the SD card or corrupt its data.
If the SD card is locked, the error message shown above is displayed. The AutoRAE 2
Controller cannot write data to a locked SD card. Remove the SD card and unlock it by
moving the lock tab upward; then reinsert the SD card.
Unlocked SD Card
Locked SD Card
If remaining space for data on the SD card is very low, the display shows the message
“SD card running low on space.” If the SD card is full, an error message appears on the
display that says: “SD card full.” Replace the SD card with another with more space on
it, or offload the data to a computer. Then erase the data from the card, using your
computer, and reinsert the SD card back into the AutoRAE 2.
IMPORTANT!
Keep the SD card port cover closed whenever an SD card is not being inserted or
removed. This helps to keep the reading mechanism and the SD card clean, especially in
dusty environments.
Lock
Tab
Lock
Tab
Summary of Contents for AutoRAE 2
