Rae AutoRAE 2, User Manual

Page: 88 / 121

20.8.2. System Settings
In Advanced Mode, you are allowed to make changes to the system’s settings.
System Settings (Advanced mode only) allow you to access the following:
Controller Information
This is read-only information about the AutoRAE 2 Controller:

Model

Serial Number

Firmware

Built
Date
You can set the date according to the format set in ProRAE Studio II.
Press [Y/+] to advance through numbers 0 through 9.
Press [N/-] to advance to the next digit.
Press [MODE] to save the new date.
Note: If you have already set the date by using ProRAE Studio II, you do not need to set
the date again. This screen is useful for checking that your date stamps are correctly set.