20.3. Placing Monitors In Cradles
When you are ready to perform bump tests or calibration tests, place monitors in the
cradles, following the instructions shown on page 22.
20.4. Performing A Bump Test
The AutoRAE 2 Controller lets you perform bump tests on individual instruments or all
instruments that are cradled. A bump test can be initiated by pressing a Bump button on
the Cradle or selecting a Bump Test via the AutoRAE 2 Controller menus.
Press [Y/+], which selects “Function”:
A menu is shown, with “Bump Test” at the top of the list, already selected (the triangle to
the right of the name indicates the selection):
When you press [Y/+] to click “Select,” this screen appears:
Summary of Contents for AutoRAE 2
