Rae AutoRAE 2, User Manual

Page: 90 / 121

DHCP Enable/Disable
You can enable or disable DHCP (Dynamic Host Configuration Protocol) at this screen.
With DHCP Enable/Disable highlighted in the Network Settings menu, press [Y/+] to
access the Enable and Disable options.
Note: The currently operational option is shown
at the top in a box.

Press [N/-] to advance to the next option.

Press [Y/+] to select the highlighted option.

Press [MODE] to close the window and return to the main menu.
Host IP Address
This is a read-only screen that shows the Host IP Address.
With Host IP Address highlighted in the Network Settings menu, press [Y/+] to access
the Host IP Address screen.

Press [MODE] to close the window and return to the main menu.
Subnet Mask
This is a read-only screen that shows the Subnet Mask.
With Subnet Mask highlighted in the Network Settings menu, press [Y/+] to access the
Subnet Mask screen.

Press [MODE] to close the window and return to the main menu.
Default Gateway
This is a read-only screen that shows the Default Gateway.
With Default Gateway highlighted in the Network Settings menu, press [Y/+] to access
the Default Gateway screen.

Press [MODE] to close the window and return to the main menu.
Port Number
You can view and change the Port Number at this screen.
With Port Number highlighted in the Network Settings menu, press [Y/+] to access the
Port Number screen.
Note: The default value is 9800.

Press [Y/+] to advance through numbers 0 through 9.

Press [N/-] to advance to the next digit.

Press [MODE] to save the new Port Number.