PART 1: CX-Programmer
OMRON
CHAPTER 4 – Reference
CX-Programmer _Page 67
3. To complete the editing, press ‘Escape’ which will exit from editing mode.
4. It may be possible to show the rung back in ladder format. Choose the
Show as Rung
Ladder
option to toggle back to ladder format. It may not be possible to show the
instructions in a ladder form.
Compile
When a program is completed, a full program check is performed and object code is produced.
In addition to allowing the inclusion of multiple programs in a PLC, CX-Programmer also allows all programs
to be compiled at the same time. Individual programs can also be selected and compiled separately. Use the
following procedure to compile programs.
1, 2, 3…
1. Select the PLC object in the project workspace.
2. Select
the
Compile PLC Programs
button from the toolbar. Alternatively, select the
Compile Program
button from the toolbar to compile one program.
A dialogue is displayed showing the compilation status. The results are shown in the
Compile
tab of the Output
window.
Note:
For a CS/CJ-series PLC, a check is made for duplicates of SBN, MCRO and BPRG numbers.
The checks that are performed during compilation can be set by selecting
Program Check Options
option from
the
PLC
menu. The Program Check Options dialogue is displayed.
It is possible to choose between three levels of checking (‘A’ is the most strict, ‘C’ is the least strict), or to
define a custom set of checks. Select the appropriate
Check Level
setting.
For the
Custom
setting, the Checks field is enabled, allowing each individual check to be set or cleared. The
scroll bar reveals further checks. Select the
OK
pushbutton to complete the operation. Select the
Cancel
pushbutton to abort the operation.
Memory View
Use the Memory View to check the amount of
Used
and
Free
program memory in the PLC together with the
Total
program memory size of the PLC. To show the correct amount of the program memory sizes of the
connected PLC, upload the program from the PLC in advance.
The program memory sizes of CS/CJ series PLCs will be shown in
Steps
and
Words
for other PLCs.
Summary of Contents for Sysmac WS02-CXPC1-EV3
