Omron Sysmac WS02-CXPC1-EV3, Operation Manual

Page: 317 / 390

PART 3: CX-Server Runtime
OMRON CHAPTER 1 - Technical Specification
CX-Server Runtime_Page 5
1, 2, 3…
1. Select About from the Help menu.
2. The About box is displayed. It provides a copyright statement and version number of the
component or tool within CX-Server.
Status Bar
The Status Bar is displayed at the bottom of many of the CX-Server component and tool windows. It provides
several helpful pieces of information while programming:
♦
Instant Help . A brief message appears in the Status Bar as menu commands and buttons are selected.
♦
Online Status . The online or offline status of the PLC.
♦
PLC Mode . When connected to a PLC, this shows the current PLC mode. Connection errors are also
displayed here.
♦
Connected PLC and CPU Type . The currently connected PLC and associated CPU can always be
referenced in the status bar.
The CX-Server Status Bar can be enabled and disabled from many components and tools by selecting the Status
Bar option from the View menu.
Technical Support
If the installation instructions for this have been followed (refer to ‘Installation’ above), no difficulties should be
encountered. However, if there is a problem, contact Customer Services.
If a problem occurs, check that it does not relate to a fault outside CX-Server. Check the following:
♦
The PC is working correctly.
♦
The PLC is working correctly.
♦
The communications system is set up correctly.
♦
The errors are cleared in the PLC.
When Customer Services need to be contacted, keep the details shown in the following table to hand. A clear
and concise description of the problem is required, together with the exact text of any error messages.
Note: Use the About box to obtain the version number of the component.