PART 2: CX-Server PLC Tools
OMRON
CHAPTER 3 – IO Table Component
CX-Server PLC Tools_ Page 25
Setting Rack Start Addresses
This option is only available to CV-series PLCs and CS1-series PLCs. Use the following procedure to set Rack
Start Addresses.
1, 2, 3…
1. Select
Rack Start Addresses
from the
Option
menu. The Rack Start Addresses dialogue
box is displayed.
2. Enter the addresses for each rack as required. Select the
OK
pushbutton to accept the
settings or select the
Cancel
pushbutton to abort the operation.
Note:
1. For CS1-H, CJ1-H, CJ1M, and CS1D CPU Units in the CS- and CJ-series PLCs,
select Options | Rack/Slot Start Address and the following dialog box will appear.
Note:
2. Select Slot Start Address Settings and click the OK button. The Slot Start
Addresses Settings dialog box shown below will appear.
Note:
3. The start address for a Rack and slot number can be specified.
This can be used, for example, to allocate fixed addresses to Input Units and Output
Units. Note: The start address information set for Racks and slots can be downloaded
and uploaded for the CPU Unit.
Units Profile Information
For CS1-series PLCs, SIOU’s, CPU SIOU’s and other units, unit manufacturing information can be retrieved,
the data read and comments saved against each unit to a Compact Flash disk when fitted. Use the following
procedure to view the unit manufacturing details:
1, 2, 3…
1. Highlight the PLC name and click the right-mouse button.
2. Select Unit Manufacturing Information and then either CPU Unit or Inner Board
Note:
An error is displayed if the unit does not support manufacturing information.
Summary of Contents for Sysmac WS02-CXPC1-EV3
