Omron Sysmac WS02-CXPC1-EV3, Operation Manual

Page: 214 / 390

PART 2: CX-Server PLC Tools
CHAPTER 10 – Data Link Editor OMRON
CX-Server PLC Tools_Page 72
Make the settings for (1) to (8) below.
Node 2
(receive)
(3)
Area setting
(area/start
address)
(4) Send size
(2) Node 1
PLC type
Node 1
(send)
Node 3
(receive)
(7) Receive
sizes from
remote nodes
(5) Node refresh sequence
:
2, 1, 3 1, 2, 3 2, 1, 3
(6)
Status area
Node 3
(receive)
Node 3
(send)
Node 2
(send)
Node 1
(receive)
Node 1
(receive)
Node 2
(receive)
Data link
status
Data link
status
Data link
status
Node 2
PLC Node 3
PLC
(8)
Offsets
(1)Participating data link nodes
To create a data link table, make the following settings in order.
1 Datalink Wizard Settings
(1) Set participating data link nodes.
(2) Set the PLC type.
(3) Set the areas.
(6) Set the status area.
(5) Set the refresh node sequence.
(4) Set the send size.
2 Node Editing Window Settings
(7) Set receive sizes from remote nodes.
(8) Set offsets.
Note 1: It is possible to add or delete nodes from the participating data link nodes (1) using the
Datalink Wizard.