PART 2: CX-Server PLC Tools
CHAPTER 2 – PLC Memory Component
OMRON
CX-Server PLC Tools_Page 14
PLC Memory Management
A number of features of the PLC Memory Component are common to both the
Memory
tab and
Address
tab.
PLC Memory component files can be saved to the CX-Server project. Use the following procedure to save
PLC Memory component details to the CX-Server project.
1, 2, 3…
1. Select
the
Save in Project
button from the toolbar. The Save dialogue is displayed.
2. Select the required data areas to include in the file from the
Areas to Save:
field.
3. Enter a comment in the
File Comment
field.
4. Select
the
OK
pushbutton to proceed.
PLC Memory component files can be saved via a standard File Save dialogue. Use the following procedure to
save a PLC Memory component file.
1, 2, 3…
1. Select
Save to File
from the
File
menu. The Save dialogue is displayed.
2. The Save dialogue is displayed. Select the required data areas to include in the file from
the
Areas to Save:
field.
3. Enter a comment in the
File Comment
field.
4. Select
the
OK
pushbutton to proceed.
5. A standard File Save dialogue is displayed. Enter a file name in the
File name
field and
select the
Save
pushbutton. PLC Memory files have a .MEM extension.
Information saved to a file can be supplemented with header information set as a preference. Refer to
Chapter
2 - PLC Memory Component
for details of setting header information to a file.
PLC Memory component files can be retrieved via a standard File Open dialogue. Use the following procedure
to open a PLC Memory component file.
1, 2, 3…
1. Select
the
Open File
button from the toolbar to open a PLC Memory component file. A
confirmation message box may appear if the file is already open. Select the
Yes
pushbutton to save the currently open details. Select the
No
pushbutton to discard the
currently open details. Select the
Cancel
pushbutton to abort the operation.
2. A standard File Open dialogue is displayed. Select a file from the Open PLC Memory
File dialogue, followed by the
Open
pushbutton. PLC Memory files have a .MEM
extension.
PLC Memory component data can be printed. Use the following procedure to print details.
1, 2, 3…
1. Open the Address Monitor window from the
Address
tab or a data area window from the
Memory
tab.
2. Select
the
Print Preview
button from the toolbar. A preview window is displayed.
3. Select the appropriate pushbutton to view the printout.
♦
Select the
Next Page
pushbutton to view the next page of the printout;
♦
Select the
Prev Page
pushbutton to view the next page of the printout;
♦
Select the
Two Page
pushbutton to view two pages of the printout at once;
♦
Select the
Zoom In
pushbutton to zoom in to the page;
♦
Select the
Zoom Out
pushbutton to zoom out from the page;
♦
Select the
pushbutton to print from the preview.
♦
Select the
Close
pushbutton to close the preview window.
4. Select
the
button from the toolbar. A standard Print dialogue is displayed.
5. Set up the required printer settings. Select the
OK
pushbutton to print the PLC Memory
details or the
Cancel
pushbutton to abort the operation.
Note:
Printer specific settings can be applied prior to printing the PLC Memory details, by
selecting
Print Setup
from the
File
menu.
Use the following procedure to copy or move information from or in the PLC Memory component.
Summary of Contents for Sysmac WS02-CXPC1-EV3
