PART 2: CX-Server PLC Tools
CHAPTER 8 – CX-Net Network Configuration Tool
OMRON
CX-Server PLC Tools_Page 62
The Add SYSMAC NET Data Link Table Item dialogue allows the memory area at the node to be configured.
Use the following procedure to configure the node.
1, 2, 3…
1.
Enter the node number in the
Node No
field; this must be in the range 1 to 126. /verify
where
2.
Enter the memory size; this must be in the range 0 to 127.
3. Select
the
OK
pushbutton to redisplay the Data Link Table Editor.
Note:
The above example applies to CV-Series, but C-Series operates in exactly the same
manner although the information displayed differs slightly.
To edit a Data Link table, double-click on a table item or select the
Edit Table Item
button
from the toolbar; the Edit Data Link Table dialogue is displayed (this is identical to the Add
Data Link Table Item dialogue shown above).
Deleting an Item from the SYSMAC NET Data Link Table
Use the following procedure to delete an item from the SYSMAC NET Data Link Table.
1, 2, 3…
1.
Select the node to delete an item and select the
Delete Item
button from the toolbar.
2.
A confirmation dialogue is displayed. Select the
Yes
pushbutton to confirm the deletion
of the item. Select the
No
pushbutton to abort the operation.
Opening an Existing SYSMAC NET Data Link Table
Use the following procedure to open an existing SYSMAC NET Data Link Table.
1, 2, 3…
1.
To open a table from disk, select the
Open
button from the toolbar in the Data Link
Editor dialogue. A standard File Open dialogue is displayed.
2.
Select a file from the Open dialogue and select the
Open
pushbutton. The SYSMAC
NET Data Link Table Editor is automatically populated with the contents of the selected
file.
Note:
SYSMAC NET Data Link table files are identified by the ‘.SM3’ extension.
Logical Error Checking
The SYSMAC NET Data Link Table Check dialogue displays any errors resulting from
validation of the address details entered in the table; it is identical in appearance to the
SYSMAC LINK Data Link Table Check dialogue shown earlier and is obtained in the same
way.
Old Format Tables
Data Link tables were previously held in ‘.SNT’ and ‘.SN2’ file format. The File Open dialogue allows these
file types to be opened in the CX-Net Network Configuration tool. Use the following procedure to open ‘.SNT’
and ‘.SN2’ formatted files.
1, 2, 3…
1. Select
the
Add (old)
option from the
Table
menu in the SYSMAC NET Data Link Table
Editor dialogue.
2.
Select a file from the Open dialogue and select the
Open
pushbutton.
Table Information
The Data Link Table Information dialogue allows the recording of comments against a
particular table and is the same both in operation and appearance, as that for the routing table
comments described earlier.
Summary of Contents for Sysmac WS02-CXPC1-EV3
