Omron Sysmac WS02-CXPC1-EV3, Operation Manual

Page: 253 / 390

PART 2: CX-Server PLC Tools
OMRON CHAPTER 11 – Routing Tables
CX-Server PLC Tools_ Page 111
2. With the courser positioned over the local network click the right mouse
button.
3. From the pop up menu select the Add connection to Remote Network option.
(selecting the Change Local Network option enables the local network number
to be changed).
4. In the Enter Relay Node Details dialogue enter the:
Relay node number . This is the ID number of the relay node. Relay Nodes
can be given any ID number in the range 1 to 126.
Remote Network number. This is the ID number that will uniquely identify
the remote connection. Each new remote connection must be given a unique
ID number in the range 1 to 127.
Note that a remote network can not be given the same ID number as an existing
Local Network.
5. Click OK . This will add the remote connection with the specified ID number
(shown in red) to the Local Network. A maximum of 20 remote connections
can be added to a network.
6. Finally from the Options menu check the table for Errors