PART 2: CX-Server PLC Tools
CHAPTER 4 – PLC Setup Component
OMRON
CX-Server PLC Tools_Page 38
1, 2, 3…
1. Ensure the PLC is online before activating the PLC Setup component.
2. Select
Transfer from PLC
from the
Options
menu. A confirmatory dialogue is displayed.
The PLC Setup component is refreshed with the details from the PLC.
Downloading PLC Settings
The
Transfer to PLC
option loads the settings to the PLC. Use the following procedure to download an IO
Table.
1, 2, 3…
1. Ensure the PLC is online before activating the PLC Setup component.
2. Select
Transfer to PLC
from the
Options
menu. A confirmatory dialogue is displayed.
Comparing PLC Settings
The
Verify
option compares the settings on the PLC with those on the PLC. This option is helpful to confirm
that a table that has been set up in CX-Server and has been downloaded to the PLC, agrees with how the
hardware is set up. Use the following procedure to compare PLC settings.
1, 2, 3…
1. Ensure the PLC is online before activating the IO Table component.
2. Select
Verify
from the
Options
menu.
Any differences (if any) are displayed in the PLC Setup component.
Summary of Contents for Sysmac WS02-CXPC1-EV3
