Omron Sysmac WS02-CXPC1-EV3, Operation Manual

Page: 256 / 390

PART 2: CX-Server PLC Tools
CHAPTER 11 – Routing Tables OMRON
CX-Server PLC Tools_Page 114
¨
Ok button: Once all data entry has been completed, selecting the ‘Ok’ button will check the table entries for
errors. If the check fails, an error description dialogue will be displayed. If the check does not detect any
errors the Main Screen will be displayed.
¨
Restore button: If during data entry, the user wished to revert back to the table state that was in effect before
the Table View was displayed; The user should select the Restore button.
¨
Cancel button: This button will cancel any changes made whilst the Table View was being displayed and
then display the Main View screen.
Transferring a Routing table to a PLC
Once a routing table has been created or edited, the routing table may be transferred to the PLC using the
following steps:
1, 2, 3… 1. If the Network Configuration Tool is ‘on-line’ to a PLC, skip to 4.
2. Save the current routing table using the Routing Table Edit menu: File – Save
Routing Table. ( Add Author and comment if required).
3. Go ‘on-line’ to the PLC. See section 10 – The Network Configuration Tool for
details of this operation.
4. From the CX-Net menu select: Routing Table - Setup
5. From the Routing Table menu select: File – Open Routing Table.
6. Select the previously created filename and select open. Or, alternatively the
routing table can be created.
7. From the Routing Table Editor menu select: Options – Transfer to PLC.
Transferring a Routing table from a PLC
The routing table held within a PLC may be transferred from the PLC using the following steps:
1, 2, 3… 1. Go ‘on-line’ to the PLC. See section 10 – The Network Configuration Tool for
details of this operation.
2. From the CX-Net menu select: Routing Table - Setup
3. From the Routing Table Editor menu select: Options – Transfer from PLC.
4. The routing table may then be saved to file by: From the Routing Table menu
select:
File – Save Routing Table.
5. Enter a suitable filename and select Save.