Omron Sysmac WS02-CXPC1-EV3, Operation Manual

Page: 71 / 390

PART 1: CX-Programmer
OMRON CHAPTER 3 – Project Reference
CX-Programmer _Page 45
♦
Expand All . Expands the project hierarchy to show all components. This option is only available from the
project workspace context sensitive menu (i.e. ensure that a component has not been selected).
Windows that have not been maximised display the following bar at the top or side of the window. Selecting
these buttons allow the window to be moved or closed respectively.
Cut, Copy and Paste
A variety of items can be copied and pasted to different locations in a project, between projects or even
applications:
Individual items can be copied, cut and pasted within, or between a Ladder program(s), Mnemonics view(s) and
symbol tables: for example, text, contacts and coils.
♦
Symbols . Individual symbol entries can be copied/moved between symbols tables (both global and local) or
a whole table can be copied/moved to another program by selecting the table and then selecting the program
to be copied. Symbol entries can also be copied or moved as text to another application.
♦
Programs / Sections . A complete program or section can be copied to another PLC (or within the same
PLC if multi-tasking) by selecting the program in the project workspace and then pasting it into the PLC.
Individual aspects of a program can be copied by selecting an area from the Ladder Diagram and pasting
into the Ladder Diagram of another program. When copying a program, the symbols used within it are also
copied to the new location. If symbols of the same name are found in the local symbol table of the
destination PLC / program, then they are left alone. Otherwise, the required symbols are added.
♦
PLCs . A complete PLC definition can be copied in the project tree by selecting a PLC, selecting the project
name and performing a paste operation (all associated components of the PLC, for example IO Table and
Memory are copied).
Standard Microsoft Windows drag and drop procedures can also be applied. CX-Programmer
automatically prevents invalid drag and drop operations by displaying a ‘No Entry’ icon.
Use the following procedure to copy or move information within CX-Programmer.
1, 2, 3… 1. Select an item, or items, in a window. More than one item can often be selected by
pressing Shift and selecting another item to extend the selection, or by pressing Ctrl
and selecting another item to add to the selection.
2. Select the Copy button from the toolbar to copy the item, or the Cut button from the
toolbar to move the item.
3. Select an area to move the items to (e.g. another window, or another place on the
project workspace tree).
4. Select the Paste button from the toolbar to paste the item. A Paste operation can be
performed several times without copying again.
Drag and Drop
In places where it is possible to perform a cut/copy/paste operation, it is usually possible to perform a drag/drop
operation. Using the mouse, click on an item and hold the mouse button down. Drag the mouse to another
location which is to receive the item, and release the mouse button. The item should be dropped.
The effect of the drop operation is shown by the mouse cursor. If a ‘+’ is shown at the bottom of the cursor,
then the drop will have the effect of duplicating the item being dragged. If not, then the item will be moved.
Symbol References Drag/Drop
It is possible to drag symbols from the symbol tables into the ladder window. This has the effect of setting an
operand of an instruction on the ladder window. When dragging into an empty cell, it is possible to create a new
contact or coil with the given symbol as the operand. To create a coil, hold down ‘Shift’ at the time of the drop,
otherwise a contact will be created.
It is possible to drag symbols into the watch window which will add references to them to the list of monitored
addresses. A ladder element (contact/coil/instruction operand) may also be dropped into the watch window.