Omron Sysmac WS02-CXPC1-EV3, Operation Manual

Page: 343 / 390

PART 3: CX-Server Runtime
OMRON CHAPTER 4 – CX- Import/Export Tool
CX-Server Runtime_Page 31
2. Select the PLC from the PLC in Project field. Details of tags, device type and network
nodes are displayed below the list box.
•
+ The plus icon indicates that tagged data is assigned to the PLC listed in the Node in
TagDB field.
•
- The minus icon indicates that there is no tagged data assigned to the PLC listed in
the Node in TagDB field.
3. Set the Export to same name PLC field to use the PLC in the current CX-Server project.
Deselect the Export to same name PLC field to select a specific PLC from the PLC in
Project field. If necessary, tag details can be edited via the Edit TagDB pushbutton.
Details of device type and network nodes are displayed below the drop-down list.
4. Select the Export Point pushbutton. The Export Point pushbutton is disabled if the
destination and source PLC types are different. If there are other differences (apart from
PLC type) the export can proceed but no Export Log is generated.
5. Select the Close pushbutton. The success or failure of the import operation is displayed
in the Import/Export tool status dialog. Select the OK pushbutton to proceed.