PART 2: CX-Server PLC Tools
CHAPTER 3 – IO Table Component
OMRON
CX-Server PLC Tools_Page 24
PLC Specific Features
A number of features specific to types of PLC are described in the following paragraphs.
Hot Swapping
Hot swapping is permitted for C1000H/C2000H PLCs and allows modules to be changed without having to
power down. The modules swapped must be identical. To Hot Swap, select the
Hot Swap
option from the
Options
menu.
Note:
With a CS1D or CVM1D CPU Unit, hot swapping (i.e., online replacement) is
possible during operation for Basic I/O Units and, for the CS1D, Special I/O Units
and CPU Bus Units as well. Open the I/O tables for the project, select the Unit to be
replaced, and select Hot Swap from the Options menu. Click the Start Hot Swap
button, remove the old Unit, mount the new Unit and click the End Hot Swap button.
Perform this operation for each Unit to be replaced.
Note:
Online replacement is possible for a CS1D or CVM1D CPU Unit in any operating
mode.
Use the following settings in the Change PLC dialog box.
CPU Unit being used
PLC type selection list
CPU Unit model
CS1D CS1H-H CPU65
or
CPU67
CVM1D CVM1-V2 CPU21
Summary of Contents for Sysmac WS02-CXPC1-EV3
