Omron R88D-1SN ECT Series, User Manual, Page: 625 / 974

9 - 65
9 Details on Servo Parameters
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
9
-7
Ap
plied
Fu
nct
ion
Ob
jects
9
9-
7-3
3B
20
hex:
Stop Sel
ect
io
n
• Selects the stop method when bit 8 (Halt) in Controlword is set to 1 , under the condition that the
Modes of operation is set to the Profile position mode (pp), Profile velocity mode (pv), or Homing
mode (hm).
• When the running motor decelerates and its speed reaches 30 r/min or lower, the operation changes
from the deceleration operation to the operation after stopping.
• The following error is cleared for all set values after the Servomotor stops.
• Mirror object of 605D hex
 Description of Set Values
Subindex 03 hex: Halt Option Code
Set
value
Deceleration operation
Operation after stopping the
deceleration operation
1 Deceleration stop at a speed which is
used in the selected operation mode
pp, pv: Profile deceleration
hm: Homing acceleration pp, hm: Internal position com-
mand is zero
pv: Internal velocity command
is zero
2 Not supported ---
3 Deceleration stop (The deceleration stop
torque is used.) pp, hm: Internal position com-
mand is zero
pv: Internal velocity command
is zero