Omron E5C series User Manual Download Page 88

Page: 88 / 372

3 Part Names and Basic Procedures

3 - 10

E5@C Digital Temperature Controllers User’s Manual (H174)

Operation Level

This level is displayed automatically when the power supply is turned ON.

This level is used for the SP, alarm values, and other basic settings and monitoring.

Normally, select this level for operation.

Adjustment Level

This level is used to set the PID constants and to perform tuning, such as autotuning.

In Adjustment Level, the settings of the parameters can be changed during operation. This is not

possible in the Initial Setting Level or Advanced Function Setting Level.

Initial Setting Level

This level is used for the most basic settings.

It is used to set the input type and other parameters.

Use it to set the input type, alarm type, and other basic settings.

Advanced Function Setting Level

This level is used for advanced settings.

Use it to assign functions to the control outputs and auxiliary outputs.

You will not be able to enter the Advanced Function Setting Level with the default settings.

To enter the Advanced Function Setting Level, first disable Initial Setting/Communications Protection

and then enter the password (

−

169) at the

amov

(Move to Advanced Function Setting Level)

parameter in the Initial Setting Level.

Use the following procedure to move to Advanced Function Setting Level.

Step 1:

Move to Protect Level.

Step 2:

Display

icpt

(Initial Setting/Communications Protect) and set it to 0.

Step 3:

Return to Operation Level.

Step 4:

Return to Initial Setting Level.

Step 5:

Display

amoV

(Move to Advanced Function Setting Level) and then enter

−

169.

Basic Setting Levels

Advanced Function

Setting Level

Power ON

Advanced settings

Step 5: Enter −169 for the

amov

parameter.

Move to Advanced Function Setting Level parameter

Enter −169. Default: 0

Operation Level

Step 4:

Key for at least 3 s

Step 3:
Press the

Keys for at least 1 s.

Level changes automatically.

Initial Setting Level

Protect Level

icpt

Initial Setting/Communications Protect

Set 0. Default: 1

Step 2: Change the parameter with the

Key and change the setting of the

icpt

parameter to 0.

amov

Used for SP, alarm
values, and other basic
settings and monitoring.

Used to set the input
type and other basic
settings.

Used to set protection
for operations.

Step 1:
Press the

Keys

simultaneously for at least 3 s.

Summary of Contents for E5C series





















































































































































































































































































































































































Search results

Summary of Contents for E5C series

Reviews:

Brands by name

Popular brands

Omron E5C series, User Manual

Search results

Summary of Contents for E5C series

Reviews:

Brands by name

Popular brands