Omron E5C series, User Manual

Page: 85 / 372

3 - 7
3 Part Names and Basic Procedures
E5@C Digital Temperature Controllers User’s Manual (H174)
3-3
P
a
rt
N
a
mes,
P
a
rt
F
u
n
c
tio
n
s, an
d Setting
Le
v
e
ls
3
3-3-1 P
ar
t Names and F
unctions
M
Mode Key Changes the
parameter that is
displayed within a
setting level. • Press once to go to the next parameter.
• Hold to go to the previous parameter.
D
U
Down Key and Up
Key Set the value. • Hold the key to increment or decrement the value
quickly.
• Any changes in settings are applied at the following
times:
• After 3 seconds elapse
• When the
M
Key is pressed
• When the level is changed with the
O
Key
S
Shift Key (PF Key) Operates as a
user-defined
function key. • Press the
S
to select the digit to change.
The PF Key operates as a Digit Shift Key by default.
Example: If you set the PF Setting parameter to STOP,
operation will stop when you press the PF Key for at
least 1 second.
• Press the PF Key once to display the Monitor/Setting
Item Level.
The parameter that is displayed is set in the
Monitor/Setting Item parameters in the Advanced
Function Setting Level.
Setup Tool Ports
Setup Tool
port
Name Description
Top-panel Setup
Tool port Use the E58-CIFQ2 USB-Serial Conversion Cable to connect the E5 @ C to
the computer (i.e., the CX-Thermo Support Software).
Front-panel Setup
Tool port
(E5EC/E5AC only) Use the E58-CIFQ2 USB-Serial Conversion Cable and the E58-CIFQ2-E
Conversion Cable to connect the E5EC, E5AC, or E5DC to the computer
(i.e., the CX-Thermo Support Software).
Front-panel Setup
Tool port (E5DC
only)
Key Name Overview Description
000