Omron E5C series User Manual Download Page 6

Page: 6 / 372

Safety Precautions

E5@C Digital Temperature Controllers User’s Manual (H174)

Safety Precautions

Definition of Precautionary Information

The following notation is used in this manual to provide precautions required to ensure safe usage of

the E5

C Digital Controllers.

The safety precautions that are provided are extremely important to safety. Always read and heed the

information provided in all safety precautions.

The following notation is used.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury or in property damage.

Symbols

Symbol

Meaning

Caution

• General Caution

Indicates non-specific general cautions, warnings, and dangers.

• Electrical Shock Caution

Indicates possibility of electric shock under specific conditions.

Prohibition

• General Prohibition

Indicates non-specific general prohibitions.

• Disassembly Prohibition

Indicates prohibitions when there is a possibility of injury, such as from electric
shock, as the result of disassembly.

Mandatory

Caution

• General Caution

Indicates non-specific general cautions, warnings, and dangers.

Summary of Contents for E5C series





















































































































































































































































































































































































Search results

Summary of Contents for E5C series

Reviews:

Brands by name

Popular brands

Omron E5C series, User Manual

Search results

Summary of Contents for E5C series

Reviews:

Brands by name

Popular brands