NF KP3000GS, Instruction Manual

Page: 155 / 279

4. Advanced Operation
PROGRAMMABLE AC/DC POWER SOURCE 136
--------
Notes
------------------------------------------------------------------------------------------------------------
 A file cannot be renamed in the USB memory if a file with the same name exists in the
NF_TOOL\NF_KP\ARB_DATA folder. An error message is displayed.
-----------------------------------------------------------------------------------------------------------------------------
4.8.3 Sequence Memory
The user-created sequence can be saved into the Sequence Memory.
Both the internal and USB memories can be selected as the Sequence Memory. Creation and saving
of a sequence are performed using the sequence menu (see
4.2 ) or the control software in the
optional CD-ROM. For the content saved in the Sequence Memory, see Table 4-9.
The internal memory has 5 Sequence Memories from No. 1 to No. 5.
Table 4-9 Content Saved in Sequence Memory
Setting Item Factory default setting
Output range selection 100 V
Output mode selection AC-INT
Parameters of Sequence Function Refer to
4.27
 SEQ Store
In the Memory View, select [SEQ Store] to change to the Sequence Save View as below, allowing
you to save, clear, and rename the sequence. For the operation method, see
4.2.8 and 4.2.9 .