NF KP3000GS, Instruction Manual

Page: 47 / 279

3. Basic Operation
PROGRAMMABLE AC/DC POWER SOURCE 28
Rated
power icon
Figure 3-4 The Rated Power Icon
Table 3-4 How the Rated Power Icon is Displayed Depending on the Power Unit
Energization Setting
Normal icon
Example:
All power unit energization settings are enabled. The rated power is set to
the maximum value that the power supply voltage can provide.
Highlighted icon
Example:
Because some power unit energization settings are disabled, the rated power
is restricted.
3.2.6 Power Off
Disable the output and ensure the OUTPUT LED is off before pressing "Off" side of the power
switch. All screens disappear and all LEDs turn off, then the power input and the output are blocked
inside the system.
3.3 Basic Key Operations
3.3.1 Changing the Output Function
(Continuous/Sequence/Simulation)
To change the Continuous/Sequence/Simulation function, press the MENU key. This operation
displays the root menu shown in Figure 3–6.
Five icons are available in the root menu. The cursor location is informed by the highlighted icon. The
description of the icon at the cursor location is displayed in the box located at the bottom of the screen.
Move the cursor to the function you want to select by using arrow keys or the jog. Each icon in
upper line represents the Continuous function, Sequence function, and Simulation function from the
left. When you press the ENTER key, the screen for the selected function is displayed. You cannot
change the function in the output on state. However, you can move to the Memory function screen
or System function screen.
Figure 3-5 The Root Menu