NF KP3000GS, Instruction Manual

Page: 22 / 279

1.2 Features
KP3000GS 3
 Control Software (Optional)
You can perform the following operations by using Control Software included in the attached
CD-ROM:

Operations same as those performed on the control panel

Editing/transferring/exporting the arbitrary waveform data*

Data logging (importing the measured values)

Editing/transferring/exporting*/performing Sequence

Editing/transferring/exporting*/performing Simulation
*Exporting the data to USB memory allows the data to be set to the KP3000GS.
 USB memory support (supported format type: FAT32)
You can write/read the following data to/from a commercial USB memory stick:

Basic setting

Sequence

Simulation

Arbitrary waveform
 Restriction of CO
2
emission (= power usage) and the display of CO
2
emission (= power
usage) during operation
The efficiency is improved by about 27 % compared to the linear amplifier method by adopting the
switching amplifier method. When the power output is low, the internal loss can be lowered by
reducing the number of power units being powered on. The function for calculating and displaying
the CO
2
emission from the internal loss or output power is equipped.

Options (partial)
 Remote Controller
A remote controller with the numeric keypad, jog, and shuttle.