NF KP3000GS, Instruction Manual

Page: 171 / 279

4. Advanced Operation
PROGRAMMABLE AC/DC POWER SOURCE 152
 Operation procedure
1. Press the [Misc] soft-key and select [2:DC Adjust]. The DC offset adjustment window opens.
2. While checking the DC offset of the output voltage, adjust the value in the [DC Adj] item so
that the DC offset gets close to zero.
3. Close the window.
4.15 Using as DC Power Supply
You can use this product as a DC power supply by switching the AC/DC mode to the DC mode or
the ACDC mode. For the voltage setting range, see
10.6 .
--------
Notes ------------------------------------------------------------------------------------------------------------
 The signal sources that can be combined with the ACDC mode are INT, SYNC, EXT, and
ADD.
 The signal sources that can be combined with the DC mode are INT and VCA.
-----------------------------------------------------------------------------------------------------------------------------