NF KP3000GS, Instruction Manual

Page: 203 / 279

5. Description of Screen and Menu
PROGRAMMABLE AC/DC POWER SOURCE 184
5.2 Menu Composition
The menu composition of this product is shown in Figure 5–2. Press the MENU key to move to the
root menu.
Root
Continuous Sequence Simulation Memory System
－
Osc
－
Measure
－ Misc
－ Limiter
－
Sequence Edit
－
Sequence Control
－
Simulation Edit
－
Simulation Control
－
Setting Store
－
Setting Recall
－ ARB Copy
－ SEQ Store
－
SEQ Recall
－
SIM Store
－
SIM Recall
－
Reset
－
PwON Mode
－ PwON Output
－ Beep
－
LCD
－
Monitor
－
Ext Control
－ Remote
－
Relay Cntrl
－
USB Eject
－ Trig Out
－ PU-ON
－
Information
－
ExtOut Pol
Figure 5-2 Menu Composition
5.2.1 Menus of the Continuous Function
The menus of the Continuous function are shown in Table 5-5. You can open each menu by using a
soft-key.
Table 5-5 Menus of the Continuous Function
Menu Description Refer to
Osc 1: AC/DC Switches the AC/DC mode. 3.4.1
2: Source Switches the signal source. 3.4.1
3: Range Switches the output voltage range. 3.4.2
4: On/Off Phs Makes the on/off phase settings. 3.4.6
Measure 1: Mode Switches the measured value display mode. 3.4.10
2: Measure Makes the measured value display settings. 3.4.9,3.4.11 ,
3: CO
2
View Displays and sets the CO
2
emission. 4.20
4: Harmonic Displays the harmonic current measured
values. 4.4
5: Disp Item Selects display items in the Simple
measured value display mode. 3.4.10
Misc 1: AGC/Acal Makes the AGC/Autocal function settings. 4.12,4.13
2: DC Adjust Sets the DC offset adjustment. 4.14
Limiter 1: Ipk Limiter Makes the peak current limiter settings. 4.1.1
2: Irms Limiter Makes the RMS current limiter settings. 4.1.2
3: V/F Limiter Sets the voltage/frequency setting range
limit. 4.1.3,4.1.4