NF KP3000GS, Instruction Manual

Page: 180 / 279

4.17 Control Using External Control Function
KP3000GS 161
 Setting the trigger output
1. Press the MENU key to move to the root menu, then select [System]. The system setting
window opens.
2. Move the cursor to [Setup] next to the [Trig Out] item, and select it. The trigger output setting
window opens.
3. Set the polarity (Positive/Negative) in the [Polarity] item, and set the pulse width in the [Width]
item.
4. Move the cursor to [OK], then press the ENTER key. The trigger output setting window is
closed.