NF KP3000GS, Instruction Manual

Page: 187 / 279

4. Advanced Operation
PROGRAMMABLE AC/DC POWER SOURCE 168
2. In the [PwON Output] item, select [2:ON] or [1:OFF]. When you select [ON], the automatic
output-on at power-on is enabled.
4.22 Using the Emission CO
2
Calculator
This is the function for calculating and displaying the weight of the carbon dioxide (CO
2
) emission
based on the measured value of the internal loss or the output power of this product. Following two
measuring modes are available: Instantaneous (Unit: kgCO
2
/h) and Integration (Unit: tCO
2
). Users
can change the coefficient for the calculation. For the specification of the emission CO
2
calculator,
see
10.11
.
--------
Notes
------------------------------------------------------------------------------------------------------------
 The emission coefficient (see 4.27 ) is not restored to the factory default setting even if you
reset this product. To restore the emission coefficient to the factory default setting, follow the
procedure below. For the default setting value, see
10.11 .
-----------------------------------------------------------------------------------------------------------------------------
 Operation procedure
1. Press the [Measure] soft-key and select [3:CO
2
View]. The [CO
2
View] window opens.