NF KP3000GS, Instruction Manual

Page: 45 / 279

3. Basic Operation
PROGRAMMABLE AC/DC POWER SOURCE 26
Table 3-3 Component Name (Control Panel) (continued)
Number Name Description Refer to
12 I key Opens the RMS current limiter set window. 4.1.2
13 SHIFT key Turns on or off the shift state, which
enables Shortcut operations. 3.3.7
14 SHIFT LED Illuminates when the shift state is turned on. 3.3.7
15 Numeric keypad Used to enter a value directly. 3.3.5
16 Arrow key Used to move across the items or
incrementing/decrementing the value by
one step.
3.3
17 Jog Used to move across the items or
incrementing/decrementing the value by
one step.
3.3
18 Shuttle Used to move across the items in the
selection box or incrementing/decrementing
the value. The greater the turning angle is,
the faster you move or
increment/decrement. 3.3
19 ENTER key Confirms the selection. 3.3
20 CANCEL key Returns to the previous state without
confirming the selection. The numerical
entry box is closed when the value was
incremented or decremented using the jog,
shuttle, or arrow key. 3.3
3.2 Power On/Off
3.2.1 Before Turning on the Power
This product can output AC 310 V/DC 440 V at a maximum. The wrong operations may cause the
electric shock or result in malfunction of your load. Please check the following before starting
operations.
 When you use this product for the first time, we recommend you to perform the test operation
without any connection to the output (without loads) with the instruction manual at your side.
 Double-check the connection to the power supply. Ensure that the cable is appropriate for the
input current and firmly connected.
 Double-check the connection to the output. Ensure that the cable is appropriate for the output
current and firmly connected.