NF KP3000GS, Instruction Manual

Page: 254 / 279

10.14 Setting Range Limit Function
KP3000GS 235
10.14 Setting Range Limit Function
This is the limit function for the setting of the internal signal source. It works when the signal
source is INT, VCA (frequency setting limit only), SYNC (voltage setting limit only), or ADD
(internal signal source only). The limitation does not work for the Sequence and Simulation. It
does not also work for the external signal source of EXT and ADD.
Voltage setting limit 1 (in the AC mode, and sine wave or clipped sine wave is selected)
KP3000GS
Setting range
(effective value)
0.1 V to 155.0 V / 0.1 V to 310.0 V
Factory default 155.0 V / 310.0 V
Resolution 0.1 V
Voltage setting limit 2 (other than Voltage setting limit 1) *29
KP3000GS
Positive
voltage
Setting Range
(Peak value)
+0.1 V to +220.0 V / +0.1 V to +440.0 V
Factory
default
+220.0 V / +440.0 V
Negative
voltage Setting Range
(Peak value)

220.0 V to

0.1 V /

440.0 V to

0.1 V
Factory
default

220.0 V /

440.0 V
Resolution 0.1 V
*29: The limitation is applied to the additional values of the AC voltage setting (recalculated to a
peak value) and the DC voltage setting.
Frequency setting limit (the lower limit

the upper limit) *30
KP3000GS
Upper limit Setting Range 1.00 Hz (AC mode : 40.00 Hz) to 550.00 Hz
Factory
default
550.00 Hz
Lower
limit Setting Range 1.00 Hz (AC mode : 40.00 Hz) to 550.00 Hz
Factory
default
1.00 Hz (AC mode : 40.00 Hz)
Resolution 0.01 Hz
*30: In the AC mode, the setting range is 40.00 Hz to 550.00 Hz.