NF KP3000GS, Instruction Manual

Page: 193 / 279

4. Advanced Operation
PROGRAMMABLE AC/DC POWER SOURCE 174
3. In the [Contrast] item, set the contrast value.
4. Close the window.
4.27 Restoring to the Factory Default Setting (Reset)
If you reset this product, the setting items marked with  in Table 4-16 are restored to the factory
default settings. Ensure that you reset this product in the output off state.
Table 4-16 Setting Items to be Reset
Setting Item Reset Factory default setting
Output on/off × Off
Output range

100 V range
AC/DC mode

AC mode
Signal source

INT
External synchronization signal (LINE
or EXT)  LINE
AC voltage setting  0 V
Frequency  50 Hz
Output waveform  Sine wave
Output on phase

0.0 deg
Output off phase

Enabled, 0.0 deg