NF KP3000GS, Instruction Manual

Page: 34 / 279

2.5 Output Cable Connection
KP3000GS 15
2. Connect the output terminal to the load with a cable. Be sure to tighten the screws firmly. If you
want to ground the output terminal at one point only, ground the Lo terminal. The Hi terminal
should not be grounded. If the load has a ground terminal, connect it to the chassis terminal of
the output terminal of this product.
 The output terminal that can be grounded is the Lo terminals. Do not ground the Hi terminal.
Hi
Lo
OUTPUT
3. Attach the resin-molded terminal cover and the output cable holder. Direct the folded part of the
resin-molded terminal cover to the upper side of the product.
OUTPUT
Hi
Lo
Hi
Lo
OUTPUT
Hi
Lo
 Do not use this product when the resin-molded terminal cover is removed. Otherwise, an electric
shock might occur.
CAUTION
WARNING